You can view this plan at Eplans.com/plan/6532-square-feet-4-bedroom-4-50-bathroom-4-garage-sp182745
Full Specs & Features
Height : 36'
Width : 139'
Bonus: 909 sq/ft
First Floor: 3426 sq/ft
Garage: 1056 sq/ft
Second Floor: 3106 sq/ft
Roof Type : Asphalt
Framing : Wood - 2x6
Guest Suite
Main Floor Master Bedroom
Split Bedrooms
Walk In Closet
Kitchen Island
Kitchenette Wet Bar
Walk In Pantry Cabinet Pantry
Exercise Room
Family Room Keeping Room
Main Floor Laundry
Media Room
Mud Room
Open Floor Plan
Storage Area
Upstairs Laundry
Vaulted / Cathedral Ceilings
Covered Front Porch
Deck
Bedroom 2:
width 17' x depth 15'
Bedroom 3:
width 13' x depth 15'
Bedroom 4:
width 14' x depth 13'
Bonus:
909 sq/ft width 42' x depth 20'
Dining:
width 14' x depth 15'
Exercise Room:
width 19' x depth 14'
Family Room:
width 19' x depth 16'
Garage:
width 22' x depth 24'
Garage 2:
width 22' x depth 24'
Grand Room:
width 17' x depth 20'
Guest Suite:
width 14' x depth 14'
Gym:
width 14' x depth 14'
Kitchen:
width 25' x depth 16'
Lounge:
width 17' x depth 25'
Man Cave:
width 15' x depth 45'
Master Bedroom:
width 16' x depth 18'
Master Walk In Closet:
width 21' x depth 24'
Media Room:
width 21' x depth 14'
Morning:
width 11' x depth 10'
Office:
width 13' x depth 15'
Wine Cellar:
width 10' x depth 15'
Floor Plan - Main Floor Plan
Floor Plan - Lower Floor Plan
You can view this plan at Eplans.com/plan/6532-square-feet-4-bedroom-4-50-bathroom-4-garage-sp182745
In addition to the house plans you order, you may also need a site plan that shows where the house is going to be located on the property. You might also need beams sized to accommodate roof loads specific to your region. Your home builder can usually help you with this. You may also need a septic design unless your lot is served by a sanitary sewer system. Many areas now have area-specific energy codes that also have to be followed. This normally involves filling out a simple form providing documentation that your house plans are in compliance.
To find out what documents you should expect with your house plans, see https://www.Eplans.com/help/faq#faq13.
In some regions, there is a second step you will need to take to insure your house plans are in compliance with local codes. Some areas of North America have very strict engineering requirements. Examples of this would be earthquake-prone areas of California and the Pacific Coast, hurricane risk areas of the Florida, Gulf & Carolina Coasts. New York, New Jersey, Nevada, and parts of Illinois require review by a local professional as well. If you are building in these areas, it is most likely you will need to hire a state licensed structural engineer to analyze the design and provide additional drawings and calculations required by your building department. If you aren’t sure, building departments typically have a handout they will give you listing all of the items they require to submit for and obtain a building permit.
Additionally, stock plans do not have a professional stamp attached. If your building department requires one, they will only accept a stamp from a professional licensed in the state where you plan to build. In this case, you will need to take your house plans to a local engineer or architect for review and stamping. In addition, plans which are used to construct homes in Nevada are required to be drawn by a licensed Nevada architect.
Note: All sales on house plans are final. No refunds or exchanges can be given once your order has been fulfilled or once we have begun to customize a home plan to your specifications.